Tuesday, January 24, 2012


I think I've got a way to salvage the tubes's I've got brazed together. I've been agonizing over this for weeks, now I have a plan.

I'll explain in more detail later. Now that I've got a plan. I should be updating a lot more. Basically I'm going to make the frame specific for a zero setback post. I'm going to build a frame that has a relaxed 71.5 seat tube angle, with a long top tube. Since a lot of frames are built for seatpost with a 20 or 25mm set back, I can just increase the length of the top tube 20mm to 25mm longer and use a zero degree seat post with a relaxed angle. All that maters is where the saddle's location is relative to the bottom bracket. That postion is 74cm above, with the nose 8cm behind the bottom bracket.

No comments: